Processors and cooling

I\o unit- is the front side bus or external data bus= it is were the data come into the processor

what ever the speed is of the FSB or EDB the speed of the buss must be matched on the mother board for maximum performance of the processor, other wise you short yourseilf of performance.



Bits- the number of bits of a processor is like the number of lanes on a high way= alowing data into the processor



Control unit- once data enter the poocessor it enters the conrtol unit and devide the data among the core or cores or your processor.



Arithmatic logic units/ ALU- Does mathmatical calculations and comparsions of the data



Regester- Scrach area ( like scrap papaer on a math test)= Holds all of the calculating data from the ALU



Back Side BUS- Connected directly to the arithmatic logic units, and the control units.



Cache- has 3 levels =Is a portion of memory usually a few megabites in size, and it is a calculated guess as to what the alu is going to need next, the control units is cappable of determining of what shold go into the cahche. EX If the Alu has performed the same calculations a few times in a row the control unit will guess that calculation is going to be nedded in the near future and it will send it to the CACHE.



Advanced trasfer cash/ ATC- were all three levils of the cash aer meshed toghter and runs at the same speed as the processor.

Processor info- If you have a 32 bit processor your going to need 32 bit drivers

Over clocking- Over clocking is were you increase the multiplyer onthe processor, Usually Threw the bios, But on old motherboards it can be done threw jumpers on the motherboard.

COOLING